|Who's Online : 17|
These are the instructions on how to use PhoenixSuit to flash stock or custom firmware on any Allwinner Smartphone and Tablets.
Requirements: Your Android device should have at least 40-50 percent of battery to perform the Flashing Process.
Step 1: Download and install Phoenix Suit on your computer. During the installation process PhoenixSuit will prompt you to install Android USB drivers (simply click on install anyway).
Step 2: Download the Stock Rom that you want to Flash on your Android Device (should be .img file).
Step 2: Now Open PhoenixSuit Application.
Step 3: Once PhoenixSuit Application is launched, click on the Firmware Tab.
Step 4: Under Firmware tab, Click on the Image Button and select the (.img) firmware file.
Step 5: Now, Power off your Android Device.
Step 4: Now, Press and Hold Volume UP or Volume Down Key from your Android Device and Connect it to the computer using the USB cable.
Step 5: Now, Without releasing any Keys, Press Power Key for 5-10 times until your device get detected by the Phoenix Suit.
Step 6: Once Phoenix Suit has detected your device, it will ask you to mandatory Format. Simply Click on Yes to Proceed.
Step 7: Now, Phoenix Suit will begin the flashing process.
Step 8: Once the Flashing process is completed, you will be able to see “Upgrade Firmware Succeed” Message. Click on OK to end the Flashing.
Step 14: Now, close PhoenixSuit application and disconnect your Android Device from the computer.
Congratulations, Now your Android Device is successfully running the Stock ROM you have Downloaded.
[*] The above tutorial only works with the firmware that comes in .img format only.
[*] Take Backup: Take a Phone backup before using the above tutorial as because during the flashing process your personal data will be removed.
[*] Credits: The PhoenixSuit Application is developed by AllWinner Technology Co, So full credits goes to then for the application.